The most important measure you can take to replace a toilet is the approximate dimension. This is the distance between the screws that hold the toilet. In general, a standard toilet will be between 27 and 30 inches deep, with a backrest height of 21 to 31 inches and a width of approximately 20 inches. An ADA-compliant version must have a seat height of 17 to 19 inches.
This is one of the reasons why the partitions around ADA-compliant bathrooms are different. Round containers are best if the toilet goes to a small room or an uncomfortable space, as they will leave more space available on the floor, but elongated bowls are the more comfortable of the two options and are common in commercial applications. If you have a shelf or any other storage space above the existing toilet, you'll want to make sure that the new toilet fits perfectly into your space. Whether you're dealing with constant blockages, serious damage, or another problem, dealing with toilet replacement isn't exactly fun.
Just keep in mind that some parts of the toilet, such as the flush valve or the washers, may need repair or replacement before 20 years pass. If the approximate measurement is less than 11 inches, you may need to replace the drain pipe or find a toilet that is designed for an approximate smaller space. When buying a new toilet, measuring and knowing the correct thickness of the toilet should be your number one priority. However, the height may vary with special toilets, such as children's toilets and wheelchair-accessible toilets.
This reduces the size of the toilet and the design eliminates a part of the toilet that is vulnerable to leaks. Tank height An important measurement you'll need to consider when buying a new toilet is the height of the tank. The easiest and most common method is to simply install the new toilet in the same position as the old toilet. When looking at the layout of the room, it is also important to consider the size of the toilet.
Toilets are rugged devices that can last up to 50 years if well maintained and used with care. Toilet manufacturers have developed several different styles of flushing, including single-flush, double-flush and non-contact toilets. A precise rugged size ensures that there is enough space between the drain pipe and the wall to fit the back of the toilet and the toilet tank when installed. In addition, it is important to note that toilets can come in elongated, compact options with a round front.
Toilets measuring approximately 10 or 14 inches are a little less common, so you may have a smaller selection of toilets of this size.
Leave Message